Maintenance and use of choke and kill manifold

　　Maintenance and use of choke and kill manifold
　　Choke and kill manifold is the necessary equipment to control kick and implement pressure control technology of oil and gas well. The configuration of hydraulic control cabinet can realize remote control.
　　The maintenance and use of choke and kill manifold include (1) regular inspection and filling of lubricating oil and grease; (2) the flat valve in manifold shall not be screwed up by force, and the hand wheel shall rotate 1 / 4 ~ 1 / 2 turn after it is in place; (3) each gate valve in manifold shall be numbered and listed. (4) In the choke manifold, when adjusting the manual throttle valve, the personnel should be at the valve side; (5) the kill manifold cannot be used for the daily injection of kill fluid, so as to avoid pipeline failure due to corrosion; (6) when the throttle valve fails, the upstream and downstream gate valves can be closed, and the downstream gate valves of the standby throttle valve can be opened to make the standby throttle valve work; (7) when the single flow valve is overhauled, the downstream gate valves can be closed.

　　Application of choke and kill manifold: it is mainly used for soft connection of internal and external discharge nozzles, and flexible connection between mud gas separator and choke manifold. It not only has high pressure resistance, heat insulation, flame retardant, fire resistance and other properties, but also has higher wear resistance of inner wall than steel pipe.
　　Two. Features: the joints are of integral vulcanization type, integral flange type and integral connection type. The diameter of the pipe body has no resistance and long service life. It is suitable for the soft connection of internal and external blowoff pipelines and choke and kill pipelines.
　　1. Flexible choke and kill manifold (pipeline) is suitable for the relative movement of drilling platform, semi submersible drilling ship or drilling ship, the connection of the parts with the change of drilling rig installation size in the future, and the transportation of oil, gas, mud and other high-pressure media (mainly including blowout pipeline, blowout pipeline and choke and kill pipeline).
　　2. Implementation standard: API specification 16C, SY / T 5323-2004.
　　3. The product has the characteristics of high pressure resistance, heat insulation, flame retardant and fire resistance, and the inner wall has high wear resistance.